Curvex
General description
Perforation
As standard supplied non-perforated
Customised perforation design on request
Sizes (module)
Min. radius of 25 mm
Angle cut from 0 degrees to 180 degrees
Max. length 3000 mm
Min. thickness 2 x 6 mm
Weight kg/m2
Surface
Untreated
Technical properties
Fire rating
A2-s1,d0
Light reflection
Depends on the paint used on site.
Air quality
Degazification: 10 daysParticulate discharge: low - less than 0.75 mg
Robustness
Able to withstand general handling during mounting and dismounting.
Made of robust material with excellent pressure resistance, and can therefore be used on walls as well.
No decomposition of the material over time.
Moisture resistance
Tested at 70% RH and 25°C
The product can withstand temperature conditions of up to 50°C.
Hygiene
Dust removal by dry duster or vacuum cleanerRemoval of marks with a damp cloth
Normal cleaning practice and neutral cleaning solutions
> see more in the maintenance guide
Installation
Curvex elements must be mounted on a stable support. Secure the elements to the support at a max. screw distance of 300 mm in both directions. Both ends of the curve must be secured to the support.
As a general rule, the Curvex elements are fixed with visible screws directly through the element.
If the Curvex elements with bevelled edges are used, push the elements close together. If on the other side, the elements requiring joint filling are used, leave a space between the elements of 2-4 mm. Bevel off square edges and prime them with Knauf in-depth primer.
Danoline recommends Knauf Uniflott filler for joint filling.
As a general rule, the Curvex elements are fixed with visible screws directly through the element.
If the Curvex elements with bevelled edges are used, push the elements close together. If on the other side, the elements requiring joint filling are used, leave a space between the elements of 2-4 mm. Bevel off square edges and prime them with Knauf in-depth primer.
Danoline recommends Knauf Uniflott filler for joint filling.
