Mitex
General description
Perforation
As standard supplied non-perforated
Customised perforation design on request
Sizes (module)
Thickness 9 or 13 mm
Min. width 2 x thickness of board
Max. width between 2 cuts is 720 mm.
Same lengths as gypsum boards.
Weight kg/m2
Surface
Untreated
Technical properties
Light reflection
Depends on the paint used on site.
Air quality
Degazification: 10 daysParticulate discharge: low - less than 0.75 mg
Robustness
Able to withstand general handling during mounting and dismounting.
Made of robust material with excellent pressure resistance, and can therefore be used on walls as well.
No decomposition of the material over time.
Moisture resistance
Tested at 70% RH and 25°C
The product can withstand temperature conditions of up to 50°C.
Installation
Glue the elements to shape by applying silicate glue to the v-cuts immediately before the installation of Mitex.
The support must be level and stable.
Maximum distance between the supports depends of the shape and the application of the Mitex element.
The Mitex elements are screw fixed directly though the panel.
The support must be level and stable.
Maximum distance between the supports depends of the shape and the application of the Mitex element.
The Mitex elements are screw fixed directly though the panel.
